Network Ready Physical Layer Switch; The PLS-345 is designed for applications that require automatic routing of Cat5 10/100Base-T signals between a common jack and an "A" and "B" jack. The PLS is also ideal for switching RS-232, DSL, RS-422/485 or telephone lines. This versatile A/B switching system can be controlled over any TCP/IP network, or out-of-band using an external modem and basic VT100 type terminal emulation.
2MB Economical, High Capacity, Call Record Buffer; If you're using a PC to collect call data from your PBX, the CRB-2MB Call Data Recorder can do the job much more effectively, and can free up that PC for other, more vital tasks. For applications where call data is sent directly from your PBX to a printer, the CRB-2MB can provide an extra measure of reliability, by ensuring that important data is not lost if the printer malfunctions. The CRB can record data from any PBX system that sends ASCII data via an RS232 interface. Individual baud rates allow simultaneous recording at one speed while outputting data at another speed. And the CRB is fast; you can transfer call records from the CRB to your PC at a maximum rate of 11,500 characters per second.
4MB Economical, High Capacity, Call Record Buffer; If you're using a PC to collect call data from your PBX, the CRB-4MB Call Data Recorder can do the job much more effectively, and can free up that PC for other, more vital tasks. For applications where call data is sent directly from your PBX to a printer, the CRB-4MB can provide an extra measure of reliability, by ensuring that important data is not lost if the printer malfunctions. The CRB can record data from any PBX system that sends ASCII data via an RS232 interface. Individual baud rates allow simultaneous recording at one speed while outputting data at another speed. And the CRB is fast; you can transfer call records from the CRB to your PC at a maximum rate of 11,500 characters per second.
High-Speed, High-Capacity Data Recorder; The PollCat III is a solid state PBX data recorder designed for remote or on-site SMDR/CDR data and alarm collection. The PollCat III can also monitor call records for suspicious phone activity or critical alarm conditions. When an alarm is detected, PollCat III will alert the proper personnel via pager, modem, or console port.
Economical, Low-Volume PBX Data Recording; The Mini PollCat 500 is designed for remote or on-site SMDR/CDR collection and alarm monitoring. The MPC-500 provides an economical solution for remote sites that produce a low volume of call records, but require all of the features and compatibility of the larger PollCat III. The MPC-500 can also monitor records for suspicious call activity or alarm conditions. If suspect call records are detected, the MPC will immediately notify the proper personnel via pager, modem, or console port.
Network Ready CDR Buffer with Alarm Monitoring; The PollCat NetLink Call Accounting Terminal is an extremely reliable, PBX data recorder, designed for SMDR/CDR data collection and alarm monitoring. Collected call records can be retrieved via TCP/IP network, via modem, or by a local PC connected directly to the Console Port. The NetLink can also monitor call records for suspicious phone activity or critical alarm conditions. When an alarm is detected, the NetLink can immediately notify the proper personnel by pager, modem, or SNMP trap.
Economical, Network Ready CDR Buffer; The PollCat NetLink Jr. (NLJ-512) provides an economical alternative to our full featured PollCat NetLink. The NetLink Jr. incorporates many of the same convenient features found in our standard NetLink, including network access capability, reliable flash memory, and advanced alarm monitoring. However, the NetLink Jr. includes only 512K of flash memory and a single PBX input port, to fit the requirements of smaller call data recording applications which require less memory for data storage, but still need a cost-effective means for accessing data via TCP/IP network.
IP-PBX Based CDR Data Recorder with Alarm Monitoring; The PollCat NetLink-VIP includes all of the familiar features that have long established the NetLink as an industry standard, plus new, added capabilities which allow the VIP to collect data from PBX-IP switches as well as serial RS232 PBX systems, and also send notification via email when an alarm event is detected. The VIP's Reliable Session Protocol compatibility allows the unit to receive call records from any Avaya PBX-IP switch connected to your TCP/IP network, providing quick, secure access to call data, without the need for a direct, serial connection to the PBX. Like the standard NetLink unit, buffered data can be retrieved via TCP/IP network, via modem or local PC, and the unit can also monitor call records for unusual call activity or critical alarm conditions. When an alarm is generated or a scheduled event occurs, the VIP can provide prompt, timely notification via email, pager, modem, or SNMP trap.
IP-PBX Based CDR Data Recorder with Alarm Monitoring Economical, 512K Version; The PollCat NetLink Jr-VIP (NLJ-VIP) provides the same, advanced PBX-IP capabilities found in the full-featured NetLink-VIP, but comes with an economical 512K memory configuration, designed for smaller data collection applications. Like the standard VIP unit, the NLJ-VIP includes Reliable Session Protocol capability for communication with Avaya PBX-IP systems, and can also provide alarm notification via email, pager, modem, or SNMP trap. The NLJ-VIP incorporates many of the same convenient features found in our standard VIP unit, including network access capability, reliable flash memory, and advanced alarm monitoring. However, the NLJ-VIP includes only 512K of flash memory and a single PBX input port, for applications that require less memory for data storage, but still need a cost-effective means for accessing data via TCP/IP network.