Managed External Modem; The MEM-336 Managed External Modem is ideal for applications that require a fail-safe, desktop modem. In order to ensure constant, reliable service, the MEM-336 always resets itself to answer on the specified number of rings and is set to a fixed baud rate at the modem port. This makes the MEM an ideal solution for remote sites that require "must answer" modem communication. The MEM is also extremely well suited for connection to devices that cannot send "AT" setup strings; the MEM configures itself on power-up, without the need for external AT configuration commands.
5-Plug, 115 VAC Network Boot Bar; NBB-115 Network Boot Bar provides a convenient means for 115 VAC power control for rack mounted equipment and other devices. The NBB-115 features "Zero Unit" mounting, which allows you to add power control capabilities to your equipment rack, without sacrificing valuable rack space. An easy-to-use Web Browser interface provides simple, yet effective control of switching, reboot and configuration functions, and a handy ASCII Text Interface allows command mode access for those who prefer to control the unit via Telnet. The NBB-115 also features two different levels of password protected security; an administrative level which can be used to control switching and reboot functions and select configuration parameters, and a user level which has switching and reboot capability, but does not permit redefinition of unit parameters. If colocation is an important factor in your application, users can also be limited to only specific plugs based on the password entered at login. Passwords are transmitted using basic 64 bit encryption to ensure that command mode access remains secure.
16 Plug Network Boot Bar; NBB-1600 Network Boot Bar allows you to control 115 VAC power on up to sixteen different devices. Like it's sister unit, the NBB, the NBB-1600 also features "Zero Unit" mounting, allowing you to add power control capabilities to your equipment rack, without sacrificing rack space. The NBB-1600 includes two separate AC power circuits, and each circuit will accept a load of up to 15 amps maximum. The easy-to-use Web Browser interface provides simple, yet effective control of switching, reboot and configuration functions, and a handy ASCII Text Interface allows command mode access for those who prefer to control the unit via Telnet. The NBB-1600 also features two different levels of password protected security; an administrative level which can be used to control switching and reboot functions and select configuration parameters, and a user level which has switching and reboot capability, but does not permit redefinition of unit parameters. Passwords are transmitted using basic 64 bit encryption to ensure that command mode access remains secure.
16-Plug, 230 VAC Network Boot Bar; For applications that require 230 VAC power control, the NBB-1600-CE Network Boot Bar allows you to control 230 VAC power on up to sixteen different devices. Like our other NBB series units, the NBB-1600-CE also features "Zero Unit" mounting, allowing you to add power control capabilities, without sacrificing valuable rack space. The NBB-1600-CE includes two separate AC power circuits; each circuit will accept a load of up to 10 amps maximum. A simple, user-friendly Web Browser Interface provides clear, effective control of switching, reboot and configuration functions, and a handy ASCII Text Interface allows command mode access for control via Telnet. The NBB-1600-CE also features two different levels of password protected security; an administrative level which is used to control switching and reboot functions and select configuration parameters, and a user level which has switching and reboot capability, but is not allowed to change configuration parameters. Passwords are transmitted using basic 64 bit encryption to ensure that command mode access remains secure.
5-Plug, 230 VAC Network Boot Bar; NBB-230 Network Boot Bar allows you to remotely control power and initiate reboot cycles on 230 VAC rack mounted equipment. Like it's 115 VAC cousin the NBB-115, this 230 VAC version of the NBB also features "Zero Unit" mounting, allowing you to add remote power control capability to your equipment rack, without sacrificing valuable rack space. The NBB-230 also features a user-friendly Web Browser interface, to provide simple, yet effective control of switching, reboot and configuration functions, and a clear, easy-to-master ASCII Text Interface for applications that require command initiated control of power functions via Telnet. Two different levels of password protected security are provided: an administrative level, which allows access to switching, reboot and configuration functions, and a user level which permits switching and reboot functions, but does not permit access to configuration menus. If colocation is an important factor in your application, users can also be limited to only specific plugs based on the password entered at login. Passwords are transmitted using basic 64 bit encryption to ensure that command mode access remains secure.
Telnet & Dial-Up Network Power Switch; Control eight individual plugs, up to 30 amps AC, via Telnet and/or dial-up modem and local terminal with the new NPS-115 Network Power Switch. Our NPS series network power switches provide network administrators with the ability to cycle power off and on from anywhere on the LAN/WAN. If your network is down, the NPS also allows the user to simply dial-in from a standard modem for out-of-band power control.
Telnet & Dial-Up Network Power Switch; Control eight individual plugs, up to 20 amps AC, via Telnet and/or dial-up modem and local terminal with the new NPS-230 Network Power Switch. Our NPS series network power switches provide network administrators with the ability to cycle power off and on from anywhere on the LAN/WAN. If your network is down, the NPS also allows the user to simply dial-in from a standard modem for out-of-band power control.
Heavy Duty, Telnet & Dial-Up Power Switch; The NPS-2HD Heavy Duty Telnet & Dial-Up Power Switch is ideal for applications that require remote switching of high-amp 115 VAC powered equipment such as power supplies on routers and other equipment. The unit includes two separate 20 amp circuits, each with it's own power input connector. This heavy duty network power switch includes all of the convenient remote access features available on our standard NPS series units, allowing communication via dial-up connection, local terminal or TCP/IP network.
Network Ready Physical Layer Switch; The PLS-345 is designed for applications that require automatic routing of Cat5 10/100Base-T signals between a common jack and an "A" and "B" jack. The PLS is also ideal for switching RS-232, DSL, RS-422/485 or telephone lines. This versatile A/B switching system can be controlled over any TCP/IP network, or out-of-band using an external modem and basic VT100 type terminal emulation.
2MB Economical, High Capacity, Call Record Buffer; If you're using a PC to collect call data from your PBX, the CRB-2MB Call Data Recorder can do the job much more effectively, and can free up that PC for other, more vital tasks. For applications where call data is sent directly from your PBX to a printer, the CRB-2MB can provide an extra measure of reliability, by ensuring that important data is not lost if the printer malfunctions. The CRB can record data from any PBX system that sends ASCII data via an RS232 interface. Individual baud rates allow simultaneous recording at one speed while outputting data at another speed. And the CRB is fast; you can transfer call records from the CRB to your PC at a maximum rate of 11,500 characters per second.
4MB Economical, High Capacity, Call Record Buffer; If you're using a PC to collect call data from your PBX, the CRB-4MB Call Data Recorder can do the job much more effectively, and can free up that PC for other, more vital tasks. For applications where call data is sent directly from your PBX to a printer, the CRB-4MB can provide an extra measure of reliability, by ensuring that important data is not lost if the printer malfunctions. The CRB can record data from any PBX system that sends ASCII data via an RS232 interface. Individual baud rates allow simultaneous recording at one speed while outputting data at another speed. And the CRB is fast; you can transfer call records from the CRB to your PC at a maximum rate of 11,500 characters per second.
High-Speed, High-Capacity Data Recorder; The PollCat III is a solid state PBX data recorder designed for remote or on-site SMDR/CDR data and alarm collection. The PollCat III can also monitor call records for suspicious phone activity or critical alarm conditions. When an alarm is detected, PollCat III will alert the proper personnel via pager, modem, or console port.
Economical, Low-Volume PBX Data Recording; The Mini PollCat 500 is designed for remote or on-site SMDR/CDR collection and alarm monitoring. The MPC-500 provides an economical solution for remote sites that produce a low volume of call records, but require all of the features and compatibility of the larger PollCat III. The MPC-500 can also monitor records for suspicious call activity or alarm conditions. If suspect call records are detected, the MPC will immediately notify the proper personnel via pager, modem, or console port.
Network Ready CDR Buffer with Alarm Monitoring; The PollCat NetLink Call Accounting Terminal is an extremely reliable, PBX data recorder, designed for SMDR/CDR data collection and alarm monitoring. Collected call records can be retrieved via TCP/IP network, via modem, or by a local PC connected directly to the Console Port. The NetLink can also monitor call records for suspicious phone activity or critical alarm conditions. When an alarm is detected, the NetLink can immediately notify the proper personnel by pager, modem, or SNMP trap.
Economical, Network Ready CDR Buffer; The PollCat NetLink Jr. (NLJ-512) provides an economical alternative to our full featured PollCat NetLink. The NetLink Jr. incorporates many of the same convenient features found in our standard NetLink, including network access capability, reliable flash memory, and advanced alarm monitoring. However, the NetLink Jr. includes only 512K of flash memory and a single PBX input port, to fit the requirements of smaller call data recording applications which require less memory for data storage, but still need a cost-effective means for accessing data via TCP/IP network.
IP-PBX Based CDR Data Recorder with Alarm Monitoring; The PollCat NetLink-VIP includes all of the familiar features that have long established the NetLink as an industry standard, plus new, added capabilities which allow the VIP to collect data from PBX-IP switches as well as serial RS232 PBX systems, and also send notification via email when an alarm event is detected. The VIP's Reliable Session Protocol compatibility allows the unit to receive call records from any Avaya PBX-IP switch connected to your TCP/IP network, providing quick, secure access to call data, without the need for a direct, serial connection to the PBX. Like the standard NetLink unit, buffered data can be retrieved via TCP/IP network, via modem or local PC, and the unit can also monitor call records for unusual call activity or critical alarm conditions. When an alarm is generated or a scheduled event occurs, the VIP can provide prompt, timely notification via email, pager, modem, or SNMP trap.
IP-PBX Based CDR Data Recorder with Alarm Monitoring Economical, 512K Version; The PollCat NetLink Jr-VIP (NLJ-VIP) provides the same, advanced PBX-IP capabilities found in the full-featured NetLink-VIP, but comes with an economical 512K memory configuration, designed for smaller data collection applications. Like the standard VIP unit, the NLJ-VIP includes Reliable Session Protocol capability for communication with Avaya PBX-IP systems, and can also provide alarm notification via email, pager, modem, or SNMP trap. The NLJ-VIP incorporates many of the same convenient features found in our standard VIP unit, including network access capability, reliable flash memory, and advanced alarm monitoring. However, the NLJ-VIP includes only 512K of flash memory and a single PBX input port, for applications that require less memory for data storage, but still need a cost-effective means for accessing data via TCP/IP network.
19 Inch Rack Mount Modem (115 VAC Powered); The RMM-288AC Rack Mount Modem is ideal for applications that require a single "industrial strength" modem that easily installs in equipment bays. The RMM requires only one rack space and has its own surge protected power supply, capable of supporting 115/230 VAC power.
19 Inch Rack Mount Modem (-48VDC & +24VDC Powered); The RMM-288DC Rack Mount Modem is designed for applications that require a single -48 VDC or +24 VDC modem that easily installs in equipment bays. The RMM-288DC requires only one rack space and has its own isolated power supply. The RMM power supply is filtered, fused and surge protected for operation in harsh environments.
115 VAC Power Control / Reboot Bar, Serial Only (RS-232); The RPB+ is an intelligent power control and reboot switch, which can be operated from a remote location via modem. Up to five connected 115 VAC devices can be rebooted or powered On or Off in response to simple ASCII commands sent via modem or from a local PC. Configuration is simple; a convenient menu system displays current plug conditions and communication parameters. The RPB+ provides password protection, on-screen plug labels to identify connected devices, a site ID message, and a user-friendly ASCII command set.
230 VAC Power Control / Reboot Bar, Serial Only (RS-232); The RPB+ 230 provides the same convenient RPB+ power control/reboot features for 230 VAC applications. Up to five connected 230 VAC devices can be rebooted, or powered On or Off in response to simple ASCII commands sent via modem or from a local PC. Status screens display current plug conditions and user-selected parameters. The RPB+ 230 also provides password protection, on-screen plug labels, a site ID message and the same user-friendly ASCII command set.
48 VDC Intelligent Remote Reboot Switch (Five Terminals); The RPB+ DC is designed for applications that require remote reset capability for 48 VDC equipment. The RPB+DC provides the same convenient features as our other RPB+ series reboot bars. Up to five connected 48 VDC devices can be rebooted or powered On or Off in response to simple ASCII commands sent via modem or from a local PC. Status Screens display circuit conditions and user-selected communication parameters. This 48 VDC version of the RPB+ also features password protection, on-screen circuit labels, a site ID message and a user-friendly ASCII command set. The RPB+ DC is ideal for use with -48 VDC powered routers, servers, and telecom equipment.
Telnet + Dial-Up High Amp -48 VDC Intelligent Remote Reboot Switch (One or Two Terminals); The RPC-4840N provides remote reset capability for high-amp, -48 VDC network equipment. Boot/On/Off commands can be sent to the unit via TCP/IP network, via modem, or from a local PC connected directly to the RPC console port. Many network devices, such as Enterprise routers require up to 35 amps of -48 VDC power; the RPC-4840N supports these high-amp requirements, with capacity to spare. The RPC-4840N features a 10Base-T Ethernet port, a dedicated external modem port, password protection, on-screen circuit labels to identify connected devices, a site ID message, and a user-friendly ASCII command set.
Code Controlled 115 VAC Power Control/Reboot Unit (One Plug, Expandable); The RPS-10 provides an expandable, code controlled solution for your power control/reboot application. The RS-232 controlled RPS-10 Master Module provides power control for one AC outlet. When your reboot needs expand, additional RPS-10 Satellite Modules can be added to allow individual control of up to ten AC outlets. Modules are linked together using standard RJ-11 style cable, for a maximum end-to-end length of 2000 feet.